ION9000 Question

Collin_Rowe · ‎2018-07-14

Two Questions:

1. Setting up a few ION9000s at a site and all of them are missing a monitoring.html. Is there default one available somewhere?

2. More of an observation. It appears to use the same setup as a pm8000 for ack alarms or disabling them, using the two button press. These touch screens however, only recognize a single touch though. Is/will there be another method of doing this from the meter screen?

Fabricio · ‎2018-07-26

Hi Collin, thanks for your post and your questions. These meters are under active development, I am not sure what are the units you are working on, neither the level of maturity of your sample. I will reach out to you over E-mail so we can work on the details and make sure your feedback is included before the release.

Thanks again,

Fabricio

See Answer In Context

Fabricio · ‎2018-07-26

Hi Collin, thanks for your post and your questions. These meters are under active development, I am not sure what are the units you are working on, neither the level of maturity of your sample. I will reach out to you over E-mail so we can work on the details and make sure your feedback is included before the release.

Thanks again,

Fabricio