Notifications

Industrial Automation Knowledge Base

Access vast amounts of technical know-how and pro tips from our community of Industrial Automation experts.

Important Note

Invite a Co-worker

Send a co-worker an invite to the portal.Just enter their email address and we'll connect them to register. After joining, they will belong to the same company.

Send Invite Cancel

Related Forums

Intelligent Devices Forum

Invite a Colleague

Found this content useful? Share it with a Colleague!

Invite a Colleague

Label: "citect scada"

View in: "Industrial Automation Knowledge Base" | Community

13 Posts | First Used: 2020-02-27

Industrial Automation Knowledge Base

Background With the advent of IIoT integration into many industry solutions, one of the most common requests nowadays is with regards to the messaging. Objective In this knowledge base article, we will show how Citect can be made to send a message to Microsoft Teams. This is useful in situations where Citect needs to urgently alert a recipient on some critical matters occurring in the plant. Although this knowledge base is made around Microsoft Teams, the concept can be similarly applied to other messaging platforms such as WhatsApp, Line and even Facebook Messenger. Disclaimer The views and opinions expressed in this article are those of the author(s) and do not necessarily reflect the official policy or position of Schneider Electric.

Issue With the standard real-time data retrieval from controllers using Node Red or EcoStruxure Operator Terminal Expert, we must add Modbus addresses to Unity Pro/EcoStruxure Control Expert variables. This increases the deployment time and effort considering that there may be iterations leading to the final variable list. Since Modbus deals natively with bytes, and the Modbus nodes generally provide data in 16-bit numbers (int, word), they must be further converted to 32-bit types using additional nodes or JS functions. Bit extraction from words also need separate nodes. Often WiFi media is used to connect the EcoStruxure Augmented Operator Advisor App on a tablet to the EcoStruxure Augmented Operator Advisor runtime. The WiFi network and/or WiFi devices may not be secure. Hence, these must be placed in an untrusted zone separated from the trusted SCADA+Controller zone by a firewall. Incoming connections from untrusted zones to trusted zones should be avoided. Outgoing connections from the trusted zone to untrusted zones can be allowed and must be monitored. To protect the controller from accidental/malicious Modbus commands, a deep packet inspection firewall (E.g. Tofino) is required. Resolution As a proof-of-concept, this article proposes to write real-time data from CItect SCADA to the EcoStruxure Augmented Operator Advisor Runtime via HTTP/json commands. This approach can mitigate the issues described above. Disclaimer The views and opinions expressed in this article are those of the author(s) and do not necessarily reflect the official policy or position of Schneider Electric.

Issue This document outline some of the user experience with respect to supervision project performance while using EcoStruxure Hybrid DCS. Use cases are like slow page update, alarm / trend & communication errors when dealing with large scale projects. There are multiple factors which effects supervision performance, however, can be finetuned with user experience. Majority of them are covered in this document to address such scenario. This gives better understanding and help user to improve supervision performance. Resolution Enter resolution. Disclaimer The views and opinions expressed in this article are those of the author(s) and do not necessarily reflect the official policy or position of Schneider Electric.

Background Many of us are experienced EcoStruxure Process Expert (formerly EcoStruxure Hybrid DCS) users. With our extensive experience, we normally just jump straight into any new versions of EcoStruxure Hybrid DCS and we are on our way. However, since EcoStruxure Hybrid DCS 2019, we have a choice to use either the Classic GPL, or the new and widely promoted Situation Awareness GPL. Using these SA GPL correctly requires the use of the correct SA styled page templates in Citect SCADA. This can be a discovery process to some, and it takes time. Objective Objective This video condenses some key knowledges into 3 basic topics to get you started right away. They are: Creating supervision pages in EPE to use SA styled page templates. Configuring the navigation area of SA styled page templates. Different types of SA styled master layouts. Disclaimer The views and opinions expressed in this article are those of the author(s) and do not necessarily reflect the official policy or position of Schneider Electric.

All control projects require some level of time synchronization. The time synchronization serves a fundamental role in any network, but it's too often added as an afterthought. However, it can mean the difference between correctly troubleshooting in minutes and returning the production to the desired level or having no idea about what caused production lost. The Network Time Protocol is a client-server protocol and has been widely adopted in all kind of Industries since 1985. It is a low-cost solution that can be easily applied for all EcoStruxure Process Expert architectures.

This knowledge base document do not intend to explain how to create a EPE supervision project but to give best practice advises on how to customize a EPE project based on General Purpose Library – GPL Situational Awareness. Software versions used in the kb: EcoStruxure Hybrid DCS 2019. GPL SA R2. This kb also apply to EcoStruxure Process Expert 2020 and further versions based on GPL SA. The GPL SA workspace include project is based on Citect Scada Situational Awareness template. The General Purpose Workspace leverage from Citect Scada Parameter Page Logo as show on the picture ... Keep reading this article to learn how to customize the GPL workspace with customer logo.

Manage forced variables in a PLC program has been a challenge on the industry for decades. Ideally every plant manager wants a ZERO force policy but in real world this not possible and eventually a force must be put in place to ensure production KPIs. Then the challenge becomes how to manager those forces. The solution to manage forces is to give full transparency by showing the status of forced variables in a SCADA system where operation managers and maintenance managers could see and take the needful action to replace the damaged sensors and then removed the forces in the PLC program. This KB shows an easy way to manage forces through the OPC quality code by displaying it in the supervision system.

Issue This document defines how to design Energy Management Systems for Cement Manufacturing, include Energy management system introduction, Energy management system Functions and the example Bill of Materials, KPIs, and predefined dashboard list. Resolution See the attachment for more details. Disclaimer The views and opinions expressed in this article are those of the author(s) and do not necessarily reflect the official policy or position of Schneider Electric.

Issue Network management including performance monitoring is an important part of system diagnostics. Integration of the network monitoring system in the SCADA system provides a single window interface for the maintenance team. Resolution This article shows the different methods available for integrating ConneXium Network Manager into Citect SCADA. Similar steps can be followed for integration in other SCADA systems as well which have an OPC client driver or support ActiveX controls. Disclaimer The views and opinions expressed in this article are those of the author(s) and do not necessarily reflect the official policy or position of Schneider Electric.

Issue With today’s control system design and engineering techniques, it is easy to overwhelm a plant operator with alarms. Compliance to Alarm management standards and guidelines like ISA 18.2 and EEMUA 191 is also a key requirement. Alarm management is a continuous process and the alarm system itself is monitored during plant operation & maintenance for optimal performance. Alarm Adviser is a web-based alarm analysis tool that helps rationalize and identify nuisance alarms in the supervisory alarm system. Resolution Alarm Adviser is an easy to use tool which can be used for new as well as existing systems. The setup and configuration takes only a few minutes, but the analysis reports provide a wealth of information in a user-friendly format. Using this tool, the O&M Engineers can easily identify the nuisance or mis-configured alarms and optimize the alarm system to enhance the operator’s efficiency. Please see attached document which will help you in your first steps with Alarm Adviser. Disclaimer The views and opinions expressed in this article are those of the author(s) and do not necessarily reflect the official policy or position of Schneider Electric.

To The Top!

Translating the page…

The page is currently translating. Please wait.

Industrial Automation Knowledge Base

Related Forums

Intelligent Devices Forum

Sending Message to Microsoft Teams with Citect SCADA

How to Configure Citect SCADA Communication with an SNMPII System

How to link EcoStruxure Augmented Operator Advisor with Citect SCADA

How to improve Supervision project performance while using EcoStruxure Process Expert projects

EcoStruxure Process Expert 2020: Jumping in to use Situational Awareness Style Pages

How to Time Synchronize M580 Controller and Operation Stations of EcoStruxure Process Expert?

How Can I Implement self-signed Certificate between AVEVA™ Plant SCADA and BME NUA 0100?

How to add a customer logo to EcoStruxure Process Expert Supervision Project

EcoStruxure Hybrid DCS - Best Practice to Deploy Supervision Projects

How to manage force status in a SCADA system using Modicon PLC?

How to Design Energy Management Systems for Cement Manufacturing

How to integrate ConneXium Network Manager with Citect SCADA

How to use Alarm Adviser with Citect

Industrial Automation Knowledge Base

Related Forums

This is a heading