Add link to correct Control Expert version installer in Remote Connect product page

Notifications

Geo SCADA and Remote Operations Devices Ideas

Use this portal to submit your innovative ideas to make Geo SCADA Expert and Devices such as SCADAPack, Trio and Realflo of greater value to you and to the SCADA & Telemetry community. Every idea will be individually reviewed by our team for merit and will be marked Under Consideration.

Search in

Invite a Co-worker

Send a co-worker an invite to the portal.Just enter their email address and we'll connect them to register. After joining, they will belong to the same company.

Send Invite Cancel

Top Liked Authors

User

Likes Count

Invite a Colleague

Found this content useful? Share it with a Colleague!

Invite a Colleague

Status:

Installing one of the newer versions of Remote Connect seems to require having the correct version of Control Expert installed prior to installing Remote Connect. It also is not clear in the documentation that Remote Connect is forward compatible with the latest Control Expert software. At the time of this writing Remote Connect 3.0.3 is recommending Control Expert 15.1, but Control Expert 15.3 is the latest available for download on Exchange.

Suggestion: provide links on the Remote Connect product page to download the correct version of Control Expert for that Remote Connect release so we don't have to try to navigate two product pages to install one piece of software.

To The Top!