Controlling a point in Geo SCADA mobile

Notifications

Ask Me About Webinar: Data Center Assets - Modeling, Cooling, and CFD Simulation
Join our 30-minute expert session on July 10, 2025 (9:00 AM & 5:00 PM CET), to explore Digital Twins, cooling simulations, and IT infrastructure modeling. Learn how to boost resiliency and plan power capacity effectively. Register now to secure your spot!

Geo SCADA Knowledge Base

Access vast amounts of technical know-how and pro tips from our community of Geo SCADA experts.

Invite a Co-worker

Send a co-worker an invite to the portal.Just enter their email address and we'll connect them to register. After joining, they will belong to the same company.

Send Invite Cancel

Invite a Colleague

Found this content useful? Share it with a Colleague!

Invite a Colleague

1070

Link copied. Please paste this link to share this article on your social media post.

Originally published on Geo SCADA Knowledge Base by Anonymous user | June 09, 2021 10:56 PM

📖 Home Back

This article describes the steps to take in order to control a point (analog or digital) in the ClearSCADA database.

Follow these steps to control a point from Geo SCADA mobile:

1)      In the Mobile configurator go to Global Settings. Right-click and select 'Update Settings'. Set the 'Controls Allowed' field to 'Yes'.

13.png2)      As per the Geo SCADA mobile help manual (search 'control' in the Geo SCADA Mobile - Administration Guide), add the MobileControlsAllowed metadata field and label.
2.png
3.png3)      On the 'Identification' tab of the point (analog or digital), check the 'Mobile Controls Allowed' checkbox.4.png 5.png4)      Create a 'Mobile Display' object in ViewX6.png5)      On the mobile device, go to the 'Displays' area to control each point7.png8.png9.png
10.png6)      Verify the changes on the mimic in ViewX or WebXGo: Home Back

Author

Anonymous user

To The Top!

Controlling a point in Geo SCADA mobile