UPS Driver for EGX300

JeroenDeville · ‎2013-05-21

Hey

Will there be a driver for the schneider UPS devices (APC // MGE Galaxy Type)?

Thanks

JamesJeanette · ‎2013-05-30

This is true.

I will place the request into my list, but I cannot guarantee when or if it will be added into the current product.

Thanks

See Answer In Context

JamesJeanette · ‎2013-05-30

Hello Jeroen.

I have not had any requests for this today. Can you describe a use case where this is needed?

James

JeroenDeville · ‎2013-05-30

We have a customer that wants to integrate his MGE Galaxy 5000 in the EGX with basic readings like current / Tension maybe some positions.

You may find a modbus list here (starting page 21)

http://www.apcmedia.com/salestools/SMAN-7P4S9V/SMAN-7P4S9V_R2_EN.pdf

It would have the same purpose as an ATV Driver that already is in the EGX.

JamesJeanette · ‎2013-05-30

Have you considered using the EGX300 Custom Device Type Generator for this customer? I believe that you will be able to provide what is needed by using this.

Here is more information on the CDTG:

https://powersolutionscommunity.schneider-electric.com/docs/DOC-1063

Let me know your thoughts.

James

JeroenDeville · ‎2013-05-30

Ok

But it would be much easier if the driver would be integrated....

The custom driver is limited....

No summary pages.

No dashbords

No real time trending

JamesJeanette · ‎2013-05-30

This is true.

I will place the request into my list, but I cannot guarantee when or if it will be added into the current product.

Thanks

JeroenDeville · ‎2013-05-30

thanks a lot !!!