Square D Powerlogic Ethernet Gateway

Anonymous user · ‎2015-08-27

Hi,

I was wondering whether anyone has seen or used this very old gateway. I am commissioning PME8 shortly and need to communicate with CM2000s via this gateway.

Both port 1 and port 2 are used. What ports should I be configuring in PME8 Management console? Client does not have any documentation.

Thanks,
Edward.

sesa209813 · ‎2015-08-28

Hi Edward,

This looks like the EGW2, and here is a public document I found on our website: http://www2.schneider-electric.com/library/SCHNEIDER_ELECTRIC/SE_LOCAL/APS/191328_50C6/EGWIB.pdf

I can continue to look around for additional documentation--It has been quite a while since this was published, and I'm not sure yet if this device was documented out of my tech pubs group.

Thanks,

Katie

See Answer In Context

sesa209813 · ‎2015-08-28

Hi Edward,

This looks like the EGW2, and here is a public document I found on our website: http://www2.schneider-electric.com/library/SCHNEIDER_ELECTRIC/SE_LOCAL/APS/191328_50C6/EGWIB.pdf

I can continue to look around for additional documentation--It has been quite a while since this was published, and I'm not sure yet if this device was documented out of my tech pubs group.

Thanks,

Katie

Anonymous user · ‎2015-08-31

Thanks Katie.

I had a quick read through the document - it looks like I won't be able to integrate this with PME8.

It uses ethernet drivers that are very old (~18years) which I am pretty sure won't work with Windows Server2012.

Regards

Edward