Panel Server video - Custom Model creation - EPC-Web

[Szymon_Hochół]

Hello Community!

Here is a demonstration video of Custom Model creation process for Modbus devices that are not natively supported by PAS.

The video has been created with v1.6 firmware.

Best regards

[Sushant_Belote]

Hi @Szymon_Hochół 

Thanks for the video.

Can you please share the link for PDM to retrieve the short name label for Measurements?

Thanks & Regards

Sushant Belote

[Guillaume_Evrard]

Hello,

as far as I know PDM is an internal SE website, not sure that it is accessible externally 

EPC Web is suggesting the right PDM shortname example if you type I, you will get IA, IB,IC etc... and upon selection you have the label of the measurement for IA,B,C you get current.

EPC W team is working on a new interface that will ease the use of the tool.

[Sushant_Belote]

Hi @Guillaume_Evrard 

Thanks for the update.

Please share the link for EPC Web.

Thanks & Regards

Sushant Belote

[Thierry_Baudard]

Hello @Sushant_Belote 

As mentionned by @Guillaume_Evrard   EPC-Web is not yet open to external SE people but only in beta-test phase for identified  internal user

Please contact your local Schneider electric support to findan alternative solution for the development of your custom model by a local Schneider Electric Process Application Engineer

Best regards

[Song-hee]

Hi @Szymon_Hochół 

I'm looking for customized alarm notification via E-mail in PAS800, it's really good exercise video to custom model integration with Panel Server.

Do you know how to get "create" authority in EPC Web or who is the related person? 

Thank you in advance.

[Szymon_Hochół]

Hi @Song-hee ,

currently it is not possible to create custom alarms and have notifications about them via e-mail from PAS.

What do you mean by "authority" regarding the EPC Web?

BR

[Rauno]

Hi @Szymon_Hochół, 

Would be a very useful tool for us PME engineers. Any updates on when it will become available? 
Currently looking at EPC web with my user and it only has a limited amount of models available and no create function. 

Cheers, 

Rauno 

[Sushant_Belote]

Hi @Rauno 

Have you tried this link?

 https://ecostruxure.se.app/commissioning/epc-w 

Thanks & Regards

Sushant Belote

[Rauno]

Thanks, that works

[RdM]

Hello @Szymon_Hochół , 

I am encountering an issue when creating a custom model in EPC. The model requires read of a number of registers with Format INT32-MOD10K. However, it is reading the two registers in the wrong order. When I modify the Swapping configuration to WORD_SWAP at either register level or the global level, there is no change in the data returned. Can you please advise on how I should proceed?  

[Guillaume_Evrard]

Hello,

What is the type of your device ?

When using MOD10K (2 registers) or Quad10K (4 registers), PAS is applying "little endian" whatever the configuration of WORD SWAP, this explains why it does not change.

Little endian = Word Swap if I remember well.

It is working well for Masterpact to get Legacy Energies or settings...

Kind Regards

[Vartika · Accepted solution]

This post is intended solely for informational purposes and does not seek responses or comments. It is, therefore, marked as solved.

[PiotrJakubczyk]

The current Eco Struxure Power Commission Web URL will be discontinued from December 15th 2024. Please use the new URL and save it for future use

 https://ecostruxure.se.app/commissioning/epc-w

[edit]

corrected link as mentioned by Guillaume_Evrard 

[/edit]

[Guillaume_Evrard]

hello,

with QA can not be the right one : https://ecostruxure.se.app/commissioning/epc-w

Kind Regards

[asparD]

Hello everyone,

I am currently trying to set up PAS600L custom model to get data from PLC through Modbus TCP/IP connection.

The model has been successfully created and exported. 

I tried to import to PAS600L, yet "Invalid Model" error appeared.

I tried also some globally released model to be imported to PAS600L.

Nevertheless, the same error keep appears.

I attached the screenshot for some reference.

Anyone had same experience? Please give me some advice.

[PiotrJakubczyk]

@asparD  did you upgrade firmware in PAS600? What PAS version are you running? 

[asparD]

I upgraded the firmware to 1.9.0 version.

I attached the further detail of the PAS device I am working on.

[Balamurugan]

The above weblink not valid. Please give to us valid link.

[Eric_HAVAS]

Hello @Balamurugan 
Please use url mentionned earlier by Guillaume (the 2024-11-18):
https://ecostruxure.se.app/commissioning/epc-w
Regards
Eric

[Balamurugan]

Thanks, that works

[mucahit]

Hi @asparD , 

Did you solve your problem? I have also same problem in PAS600L. When I tried to add custom model , gives invalid model error.

[Guillaume_Evrard]

Hello @mucahit,

Can you provide the PAS FW ?

Can you provide the custom model ?

When was the custom model exported from EPC W ?

Please upgrade your PAS to 2.2 FW and reexport the model from EPC W and retry.

Thanking in advance,

Kind Regards