Integration of ABB IED on SPA protocol with our SE RTU.

[Kaushal]

Hi,

Looking for an expert who can support in configuration of ABB IED on SPA protocol with our SE RTU.

We have our Saitel RTU with SPA Master protocol embedded in it. The SPA slave IEDs are to be communicated with our Saitel RTU. We have been successfully communicated the IED but we are not successful to get data from the IED. I understand that something we are doing wrong in our configuration due to which we are unable to read data from the IED. Need support from an expert to support us resolve this issue.

[Anonymous user]

Hi the community members can you help this member on this topic, please?

@Romain_Polette do you think you can advise on this topic?

@Kaushal if you still in the same situation please do not hesitate to inform us here.

Have a nice day.

[Kaushal]

Hi Nedjma,

Yes, we are still in the same situation.

We are able to integrate ABB IED with our Saitel DP RTU on SPA protocol but not able to receive data from the IED.

[Romain_Polette]

Hello @Kaushal and @Nedjma , 

I cannot help because the Saitel RTU gateway is not in my scope.

The SPA-Bus is a specific protocol of ABB and I do not know how it works.

I strongly recommend to ask this question in the following forum : https://community.se.com/t5/Partner-Protection-Relays/bd-p/protection-relays-forum

Regards,