- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Email to a Friend
- Report Inappropriate Content
Link copied. Please paste this link to share this article on your social media post.
Firmware Link 150 Version 5.0.23
RELEASE NOTES:
- ION Protocol support
- Increased TCP/IP connection support from 16 to 32.
- 32 Modbus Serial devices can be polled from 1 TCP/IP channel.
- CyberSecurity improvements
- Firmware: Binary file name change to gateway.bin from exploit.bin
- Preboot and boot upgrade through FTP.
- Link150 device reset in case of unresponsive hang in field
Please see the User Guide for more information.
James
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Email to a Friend
- Report Inappropriate Content
Link copied. Please paste this link to share this article on your social media post.
Great to see ION protocol support now in the Link150!
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Email to a Friend
- Report Inappropriate Content
Link copied. Please paste this link to share this article on your social media post.
Hi James Jeanette,
Since it is supporting ION protocol, it means the device is capable to work as "pass through" instead it works like Gateway (not converter). Is this statement correct?
Thanks,
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Email to a Friend
- Report Inappropriate Content
Link copied. Please paste this link to share this article on your social media post.
Hi Indrajit!
Copying ARNAUD DENIS as he now manages the gateways & energy servers.
Yes, the Link 150 has ION protocol support as a pass-through (wrapper).
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Email to a Friend
- Report Inappropriate Content
Link copied. Please paste this link to share this article on your social media post.
Hi,
Is there anything specific to set up to allow an ION 7650 to be added?
I have a site where an ION7650 is connected to the BMS, and we would like to move it to PME, do I just add it as normal with ION protocol and let the Link150 work it out??
Thanks
Andy