FDM128 HMI showing values from CL110

[Nikolaj_Johansen]

Hi!

Is it possible to connecting FDM128 HMI trough Panel Server Universal to a CL110 Enviroment sensor

I have the set up where i have 6 CL110 connected to my Panel Server and want to show then on EG. FDM128 HMI. but cant find any supported device list for this HMI

[Eric_HAVAS · Accepted solution]

Hello @Nikolaj_Johansen 
You can refer to FDM128 user guide, chapter "Monitored Devices Through EcoStruxure Panel Server Gateway" to get the list of products that you can address through the panel server:  https://www.se.com/fr/fr/download/document/DOCA0037EN/
Regards

[Guillaume_Evrard]

Hello @Eric_HAVAS,

I understand that CL110 data can not be displayed on FDM128, correct ?

Kind Regards

[Eric_HAVAS]

Hello @Guillaume_Evrard 
Yes I understand the same according FDM128 user  guide

[Romain_Polette]

Hello @Nikolaj_Johansen , 

FDM128 does not support CL110 / TH110 data. Screen will display "not supported".

Regards, 

[Nikolaj_Johansen]

Is it possible that it will be supported in the future.?