Co2 tons using ComX 510

[p_dejarmy_encos]

A client is requesting a metering system for many production lines (~70) and they want the metering system to include the calculaton of equivalent Co2 tons. They're looking for a system as cheap as possible, so PME is not in the scope of the project. Is there a way to calculate these values directly in the ComX 510 and report them back to the client?

Thanks.

[Anonymous user]

Hi the community members can you help this member on this topic please?

@Romain_Polette  do you think you can advise on this topic?

@p_dejarmy_encos if you still in the same situation please do not hesitate to inform us here.

[Romain_Polette · Accepted solution]

Hello @Nedjma , 

@p_dejarmy_encos asked a similar question for Power Meters here :https://community.se.com/t5/Power-Metering/Co2-calculations-in-energy-meter/m-p/187756#M3833

Com'X510 can perform data logging but not data aggregation. Com'X is not able to perform any calculation. 

So the Com'X cannot fit the need.

Regards, 

Romain

[Anonymous user]

Hello @Romain_Polette,

Thank you for informing me about this double topic. 

@p_dejarmy_encos as you have already posted here and you have got your problem solved I allow myself to close this topic. Indeed the guidelines of the community (check here) not allow to publish the same questions in different areas.

I kindly invite all the community members to click on this link to have the answer for this question : https://community.se.com/t5/Power-Metering/Co2-calculations-in-energy-meter/m-p/187756#M3833 

Thank you for your understanding!