temp coming fron Netboz

[DCIM_Support]

Hi team,

is it possibile to use the temperatures coming from the Netbotz sensors into the DCO (Capacity modules) for the CFD simulation? In other words I would like to use for the CFD modelling a mix between real time temperature coming from the PDUs and coming from the Netbotz.

Thanks in advance

Roberto Rumi

(CID:99156961)

[DCIM_Support]

Hi Roberto,

It is possible to use the Netbotz temperature sensors in the 3D view. Here will you be able to calculate the measured temperature plane using those temperature sensors together with other temperature sensors from for instance Rack PDU's or other environmental equipment.

Thanks

Jesper

(CID:99156990)

[DCIM_Support]

This question is closed for comments. You're welcome to start a new topic if you have further comments on this issue.