Subscribing is a smart move!
You can subscribe to this board after you log in or create your free account.
Invite a Co-worker
Send a co-worker an invite to the portal.Just enter their email address and we'll connect them to register. After joining, they will belong to the same company.
Send Invite Cancel
Solved
Go to Solution
Accepted Solutions
Link copied. Please paste this link to share this article on your social media post.
Hi Jan,
The SUMX app or the Smart-UPS / Matrix application is the most recent available NMC1 (AP9617/18/19) for the Smart-UPS in the StruxureWare DCE firmware catalog. I just downloaded the most recent and checked:
6.4.6 firmware is only available for the NMC2 cards (AP9630/31/35).
If there is a newer version, it may take a little time to get it into the catalog but until that is done, the only option would be to manually upgrade the cards. At this time however, that seems to be the most current available on the downloads page:
Thanks,
Steve
Link copied. Please paste this link to share this article on your social media post.
Hi Jan,
The SUMX app or the Smart-UPS / Matrix application is the most recent available NMC1 (AP9617/18/19) for the Smart-UPS in the StruxureWare DCE firmware catalog. I just downloaded the most recent and checked:
6.4.6 firmware is only available for the NMC2 cards (AP9630/31/35).
If there is a newer version, it may take a little time to get it into the catalog but until that is done, the only option would be to manually upgrade the cards. At this time however, that seems to be the most current available on the downloads page:
Thanks,
Steve
Link copied. Please paste this link to share this article on your social media post.
This question is closed for comments. You're welcome to start a new topic if you have further comments on this issue.
Create your free account or log in to subscribe to the board - and gain access to more than 10,000+ support articles along with insights from experts and peers.