What are the conditions to get a communication error?

[DCIM_Support]

The dcim devices are in a different subnet then the DCE server. whenever there is a firewall switchover (the firewall is the default gateway for both subnets) i get a communication error and an email notification. All though all devices are still online. After a couple of minutes (after the next cycle)  i get a clear massage.

What are the tresholds for this notification

(CID:132670375)

[DCIM_Support]

Dear Eitan Nachman,

Are you interested in both SNMP and TCP/IP Modbus protocols?

With respect.

(CID:132670389)

[DCIM_Support]

Yes.

(CID:132670646)

[DCIM_Support]

We are using DCE 7.5.0 and have the same problems.

Thanks,

(CID:132670644)

[DCIM_Support]

I am using DCE 7.5.0.62, but this issue was on previous versions as well.

(CID:132670658)

[DCIM_Support]

Any one have an answer for this issue?

(CID:133370195)

[DCIM_Support]

This question is closed for comments. You're welcome to start a new topic if you have further comments on this issue.