UPS WEB page display issue

[DCIM_Support]

This question was originally posted on DCIM Support by Shoaib Maqsood on 2019-01-23

---

UPS webpages are not auto updating UPS
parameters(voltage, load and fault status) at DCE. One has to refresh & login to
webpage every time to check the actual UPS parameters. 

(CID:138808440)

[DCIM_Support]

This comment was originally posted on DCIM Support by spezialist on 2019-01-23

---

Dear Shoaib Maqsood,

Please show a couple of explanatory screenshots of your problem so that you can be helped faster and better.

With respect.

(CID:138808521)

[DCIM_Support]

This comment was originally posted on DCIM Support by Shoaib Maqsood on 2019-01-23

---

For Kind Reference.

(CID:138808574)

[DCIM_Support]

This answer was originally posted on DCIM Support by spezialist on 2019-01-24

---

Dear Shoaib Maqsood,

As far as I know, the specified by you web-GUI of UPS does not support autorefresh at all. Therefore, you must manually force the refresh of the UPS web page (for example, by pressing the F5 button in the browser).

With respect.

(CID:138809132)

[DCIM_Support]

This comment was originally posted on DCIM Support by spezialist on 2019-02-09

---

Dear Shoaib Maqsood,

Tell us, please, did you solve your question or not?

With respect.

(CID:139693934)

[DCIM_Support]

This question is closed for comments. You're welcome to start a new topic if you have further comments on this issue.