EcoStruxure IT forum
Schneider Electric support forum about installation and configuration for DCIM including EcoStruxure IT Expert, IT Advisor, Data Center Expert, and NetBotz
Link copied. Please paste this link to share this article on your social media post.
Posted: 2020-07-05 04:35 PM . Last Modified: 2024-04-03 05:02 AM
Hello
I've seen in a forums answers, that associations can be restored after DCE IP/MAC changed. using some script repair_associations_75. Any hints where it is located?
Regards
Olegas
(CID:138810396)
Link copied. Please paste this link to share this article on your social media post.
Link copied. Please paste this link to share this article on your social media post.
Posted: 2020-07-05 04:35 PM . Last Modified: 2024-04-03 05:02 AM
Hi Olegas,
That was basically some experimental workaround, which had been created some time ago. If you are building/rebuilding a setup or configuration, perhaps re-associations could be an option.
Kind regards
(CID:138810443)
Link copied. Please paste this link to share this article on your social media post.
Link copied. Please paste this link to share this article on your social media post.
Posted: 2020-07-05 04:35 PM . Last Modified: 2024-04-03 05:02 AM
Thank you.
We will re-associate current devices.
Just for info. If there will arise a need for changing big amount of associations, can such thing be ordered from a support?
Regards
Olegas
(CID:138810907)
Link copied. Please paste this link to share this article on your social media post.
Link copied. Please paste this link to share this article on your social media post.
Posted: 2020-07-05 04:36 PM . Last Modified: 2023-10-22 03:47 AM
This question is closed for comments. You're welcome to start a new topic if you have further comments on this issue.
Link copied. Please paste this link to share this article on your social media post.
Create your free account or log in to subscribe to the board - and gain access to more than 10,000+ support articles along with insights from experts and peers.