PME Integration

[DCIM_Support]

Hi All,

Do you have any experience and best practice example for DCO&DCE integration with PME?

Thanks 

Kerem

(CID:105466358)

[DCIM_Support · Accepted solution]

Hi Karem, DCIM Support has a dedicated section on Configuring StruxureWare Power Monitoring Expert integration, hope this helps.  

(CID:105466400)

[DCIM_Support]

Hi Ajay, I know that pdf before. I just hope what is the best practices of that. I mean that integration is used just monitoring or can i create a report. Can i associate PME nodes with DCO devices? with So, i need any experience for that integration. Thanks kerem

(CID:105466401)

[DCIM_Support]

Hi Karem, once PME devices show up in 'unassociated devices' pane, you can either auto associate (based on matching fields http://dcimsupport.apc.com/questions/105464964/etl-import-auto-association-fields ) or a manual association with DCO devices.

(CID:105466424)

[DCIM_Support]

Hi Ajay, Thank you again. So do you know can DCE integrate with PME? Regards Kerem

(CID:105466425)

[DCIM_Support]

Hi Karen, we have some experience drawing alarm and performance data from PME into SBO if that helps.  Feel free to email

Cheers

Ed

(CID:105466487)

[DCIM_Support]

This question is closed for comments. You're welcome to start a new topic if you have further comments on this issue.