EcoStruxure IT forum
Schneider Electric support forum about installation and configuration for DCIM including EcoStruxure IT Expert, IT Advisor, Data Center Expert, and NetBotz
Link copied. Please paste this link to share this article on your social media post.
Posted: 2020-07-03 12:11 AM . Last Modified: 2024-04-09 12:59 AM
Hello,
Customer was running DCO (v7.3.0) and migrated the server from an AMD ESX 5.5 to an Intel ESX 6.0.
After upgrading the VM Tools, the server does not boot.
Console shows:
Regards,
Eduard
(CID:105466382)
Link copied. Please paste this link to share this article on your social media post.
Link copied. Please paste this link to share this article on your social media post.
Posted: 2020-07-03 12:11 AM . Last Modified: 2024-04-09 12:59 AM
Hi Everard,
It seems the disk ID have been lost/changed, apparently caused by the VM Tools upgrade. I would suggest considering a fresh installation of the DCO software and then restoring the latest backup file. Furthermore, 7.3.0 is a very old version and unsupported, it is highly recommended to upgrade the product to the latest version (the current release is DCO 7.5).
Kind regards
(CID:105466391)
Link copied. Please paste this link to share this article on your social media post.
Link copied. Please paste this link to share this article on your social media post.
Posted: 2020-07-03 12:11 AM . Last Modified: 2023-10-31 10:49 PM
This question is closed for comments. You're welcome to start a new topic if you have further comments on this issue.
Link copied. Please paste this link to share this article on your social media post.
Create your free account or log in to subscribe to the board - and gain access to more than 10,000+ support articles along with insights from experts and peers.