PCOweb UNIFLAIR on Ecostruxure

[DCIM_Support]

Hi, 

I checked DFF file for Ecostrxure but there is no one for Uniflair PCOweb. 

Is it possible to add a PCOweb in Ecostruxure because when I searched the product with SNMP I obtain this error : 

 

Should I try to discover with advanced mode? 

Thanks in advance for your help. 

Regards. 

Samuel

(CID:134685542)

[DCIM_Support · Accepted solution]

Dear Samuel,

Uniflair PCO web SNMP is indeed supported on EcoStruxure IT gateway 1.4.0. 

When you are discovering the device, select "Advanced" and Uniflair device as shown below.

I hope this helps. 

Regards,

Bala

(CID:134685552)

[DCIM_Support]

Hi Bala, 

I will checked.

Thanks a lot for your help. 

Regards

Sam

(CID:134685577)

[DCIM_Support]

Hi Samuel,

You can try with this DDF

http://sxwhelpcenter.ecostruxureit.com/devices/view.action?deviceId=UG40%2FMP40&vendorId=Uniflair%2F...

(CID:134685888)

[DCIM_Support]

Dear Jesus Banegas,

The DDF-file you specified is the file for the DCE software.

This topic deals with the new free software EcoStruxure IT Gateway, which uses a signed DDF catalog. In this software, a user cannot add or delete DDF-files. At the moment, the signed DDF catalog is modified and updated with each new release of this software.

With respect.

(CID:134685968)

[DCIM_Support]

This question is closed for comments. You're welcome to start a new topic if you have further comments on this issue.