Netbotz - what hashing algorithm is used with RADIUS authentication?

[DCIM_Support]

Hi, on RADIUS server end I need to authenticate netbotz AP9361 device v3.9.1. My question is what's hashing algorithm is used in RADIUS.

My example RADIUS protocol Request-Access from device to the RADIUS server (captured and decoded with Wireshark):

AVP: l=7 t=User-Name(1): netadmin AVP: l=18 t=User-Password(2):  f72ef456e2275e76cd42d5aaa37ff620 AVP: l=6 t=NAS-IP-Address(4): 192.168.0.2 AVP: l=25 t=NAS-Identifier(32): testdevice.local AVP: l=6 t=NAS-Port(5): 2

(CID:106892191)

[DCIM_Support]

Hi eject_ck, thanks for posting! Let's see who can be of assistance here. @commmunity - any ideas? Best, Stine

(CID:106892363)

[DCIM_Support]

Hi Evgeniy,

I'v sent an e-mail to development to see if they can provide some insight on this as I am unsure. Can I ask why you're looking into this? It should simply work when using freeradius. There should be no specific hash configuration on the freeradius side of things.

Steve

(CID:106892457)

[DCIM_Support]

Hi Evgeniy,, Word from dev is: I think they are referring to if it uses PAP, CHAP, EAP, etc which are different authentication mechanisms for RADIUS. All the NMC1/NMC2 based stuff only supports PAP which is ASCII and plain text. Steve

(CID:106892462)

[DCIM_Support]

This question is closed for comments. You're welcome to start a new topic if you have further comments on this issue.