Netbotz Video Streaming

DCIM_Support · ‎2020-07-05

This question was originally posted on DCIM Support by HRANT ARSLANIAN on 2019-10-20

Dear Support,

Is there any Netbotz room monitor similar to 355 with video streaming option?

Our customer highly needs to install a netbotz room monitor with environmental monitoring and video streaming.

Kindly looking forward to your advice,

Thank you in advance,

Best Regards,

DCIM_Support · ‎2020-07-05

This answer was originally posted on DCIM Support by Steven Marchetti on 2019-10-21

Hello,

Can you please be more specific about what you're trying to do? If you want to look at images, simply use the web or Advanced View software. If you're trying to pass data from your NetBotz device to a 3rd party application, you'll want to pull the individual images (no streaming on these units) from the device. You can do this via URL:

http://<netbotz_IP>/images/nbOwlEnc_0_CAMERA/640x480/campic.jpg

nbOwlEnc_0_CAMERA is for camera 1, nbOwlEnc_1_CAMERA would be for camera 2, etc.

If you're suing DCE, that's another level and again, I suggest being more specific.

Thanks,

Steve

DCIM_Support · ‎2020-07-05

This comment was originally posted on DCIM Support by Steven Marchetti on 2019-10-21

P.S.

The new NetBotz camera pod 165 uses the "onvif" protocol so you can use that for pulling a stream from the NBPD0165

Steve

DCIM_Support · ‎2020-07-05

This comment was originally posted on DCIM Support by HRANT ARSLANIAN on 2019-10-22

Hello Steven,

Thanks to your feedback,

To be more specific, our customer wants to integrate Netbotz room monitor 355 (total of 90 355 netbotz) with Genetec CCTV system, which accepts video streaming of type MJPEG.

I already know that we can only stream JPEG images from the room monitor 355. So my question; Is there any way that we can stream MJPEG from 355? or is there any netbotz room monitor with camera that can stream MJPEG?

I hope I made it more specific,

Thanks to you advice in advance,

Best Regards,

DCIM_Support · ‎2020-07-05

This question is closed for comments. You're welcome to start a new topic if you have further comments on this issue.