Welcome to the new Schneider Electric Community

It's your place to connect with experts and peers, get continuous support, and share knowledge.

  • Explore the new navigation for even easier access to your community.
  • Bookmark and use our new, easy-to-remember address (community.se.com).
  • Get ready for more content and an improved experience.

Contact SchneiderCommunity.Support@se.com if you have any questions.

Close
Invite a Co-worker
Send a co-worker an invite to the Exchange portal.Just enter their email address and we’ll connect them to register. After joining, they will belong to the same company.
Send Invite Cancel
84626members
353950posts

Netbotz Rack Access Control 3rd Party integration

EcoStruxure IT forum

A support forum for Data Center Operation, Data Center Expert, and EcoStruxure IT product users to share knowledge on installation, configuration, and general product use.

DCIM_Support
Picard
Picard
0 Likes
1
132

Netbotz Rack Access Control 3rd Party integration

This question was originally posted on DCIM Support by Antonio Racioppoli on 2019-09-16


Hi,

I were requested if it's possible to integrate the Netbotz Rack Access Control System (NBACS1356 or NBACS125) with a 3rd party Room Access Control System (e.g. a person opens the Room door with its badge and, after that, he is enabled to open some of the Racks).

I was thinking that a possible approach could be that the Room System and the Netbotz System shares the same RADIUS authentication system.

According to my understanding, RADIUS would store the associations between Racks and Users and both Netbotz and the Room system would use the same repository. All the required rules (e.g. the user entitled to open some Racks after opening the Room door) could be handled by the Room system as Master. Does it make sense?

Thanks a lot

(CID:148770114)

1 Reply 1
DCIM_Support
Picard
Picard
0 Likes
0
132

🔒 Closed

This question is closed for comments. You're welcome to start a new topic if you have further comments on this issue.