Need DDF for my Raritan PXE-1862V

[DCIM_Support]

This question was originally posted on DCIM Support by cuevasm on 2017-09-11

---

HELP please

(CID:124525929)

[DCIM_Support]

This answer was originally posted on DCIM Support by Balaraman Jagadeesan on 2017-09-11

---

Dear Michael,

Please check on the below Device support page. If you do not find your device on the list, you can request a new DDF for this exact model with SNMP walk and MIB file of the devices. 

https://dcimsupport.apc.com/devices

I hope it helps. 

Regards,

Bala

(CID:124525939)

[DCIM_Support]

This comment was originally posted on DCIM Support by spezialist on 2017-09-17

---

Hi cuevasm,

Have you solved this problem or not?

With respect.

(CID:125208262)

[DCIM_Support]

This comment was originally posted on DCIM Support by cuevasm on 2017-09-19

---

Not yet. Been busy with other projects. Still haven't figured out how to get the SNMP walk file.

(CID:125209428)

[DCIM_Support]

This comment was originally posted on DCIM Support by cuevasm on 2017-09-19

---

What interfaces am I walking?

(CID:125209479)

[DCIM_Support]

This comment was originally posted on DCIM Support by spezialist on 2017-09-19

---

Hi cuevasm,

It seems that the DDF-file request for Raritan PXE-1862V has already been created quite recently. It remains only to wait...

What interfaces am I walking?

If you are talking about snmpwalk of your device, then always refer to its Ethernet interface. Did I understand you correctly?

With respect.

(CID:125209513)

[DCIM_Support]

This comment was originally posted on DCIM Support by cuevasm on 2017-09-19

---

Perfect. Thank you

(CID:125209519)

[DCIM_Support]

This comment was originally posted on DCIM Support by cuevasm on 2017-09-19

---

I actually created the request you sent me. I have to figure out how to create a SNMP walk file for that Rack PDU in order to complete the process

(CID:125209531)

[DCIM_Support]

This comment was originally posted on DCIM Support by cuevasm on 2017-09-19

---

Can anyone help me create a SNMP walk file?

(CID:125209540)

[DCIM_Support]

This answer was originally posted on DCIM Support by spezialist on 2017-09-19

---

Can anyone help me create a SNMP walk file?

The necessary information can be read in article How to create a SNMP walk file for Struxureware Data Center Expert/EcoStruxure IT Gateway I hope everything will be clear there, but if there are questions, please ask.

Always glad to answer your questions.

(CID:125209597)

[DCIM_Support]

This question is closed for comments. You're welcome to start a new topic if you have further comments on this issue.