EcoStruxure IT forum
Schneider Electric support forum about installation and configuration for DCIM including EcoStruxure IT Expert, IT Advisor, Data Center Expert, and NetBotz
Link copied. Please paste this link to share this article on your social media post.
Posted: 2020-07-03 03:30 PM . Last Modified: 2024-04-08 12:56 AM
hello, we have MGE Upsilon STS 250 installation whit 66074 communition card.
http://www.apc.com/shop/au/en/products/MGE-SNMP-Web-Card/P-66074
in DCE this unit use mge ups ddf not a mge sts ddf.
do i need sam additional setup for 66074?
(CID:116924812)
Link copied. Please paste this link to share this article on your social media post.
Link copied. Please paste this link to share this article on your social media post.
Posted: 2020-07-03 03:30 PM . Last Modified: 2024-04-08 12:56 AM
Hello Darius,
Normally it does not require any additional set up, just connect the card to the slot and discover the device in DCE and that should work fine.
Please let us know if you have any problems in viewing the parameters in DCE.
Thanks and Regards,
Mohan Gowda
(CID:116926245)
Link copied. Please paste this link to share this article on your social media post.
Link copied. Please paste this link to share this article on your social media post.
Posted: 2020-07-03 03:30 PM . Last Modified: 2023-10-22 02:59 AM
This question is closed for comments. You're welcome to start a new topic if you have further comments on this issue.
Link copied. Please paste this link to share this article on your social media post.
Create your free account or log in to subscribe to the board - and gain access to more than 10,000+ support articles along with insights from experts and peers.