Full patch panel "alarm"

[DCIM_Support]

Hi everyone,

When I have a patch panel that all its ports are connected, means the panel is full of cables and no available ports at all.

Is there a way to know this before or after it happens? Or the only way to know it is manually enter the panel and see it?

Thanks !!

(CID:140218098)

[DCIM_Support]

Hi Sheep,

There is no way to know this before or after it happens, you are right we need to manually check the patch panel(s). (ex. click on the patch panel in rack view, and check the port configurations in the Network management tab).

Kind regards

(CID:140711860)

[DCIM_Support]

This question is closed for comments. You're welcome to start a new topic if you have further comments on this issue.