Exporting specific DC

DCIM_Support · ‎2020-07-04

Hello everyone!

Im here looking for your help once again!

My inventory has for example 5 different rooms.
i want to take the 4th one and export it to HD and import on another server i own that has different license.
And i dont want any of the other DCs data to be exported, only the 4th one

Is there a way of doing this?

Thank you

DCIM_Support · ‎2020-07-04

Hi Gleb,

You can use the Migration feature in DCO, it is available in desktop client, System Setup > Migrate from StruxureWare Operation

The migration feature can/may be applied between two different setups/installations and executable only once! (eg. multiple migration is not allowed).

1- take a backup of the current setup (5 rooms)

2- restore the backup on a test server

3- on the test server, delete the unwanted rooms

4- now the test server should contain the wanted room. Take a backup.

5- backup from step 4 can now be migrated to the destination server.

Note: it is recommended to take a fresh backup (on the destination server) before starting the migration.

Kind regards

See Answer In Context

DCIM_Support · ‎2020-07-04

Hi Gleb

Not sure if there's a way to do exactly what you want. perhaps you could backup/restore the entire DCO then delete the unwanted 4 rooms?

Way can't you take all 5 rooms?

Cheers

Ed

DCIM_Support · ‎2020-07-04

Um i will look into the deleting from backup way...
I need to take it to other site that dont need to have the others

DCIM_Support · ‎2020-07-04

Hi Gleb,

You can use the Migration feature in DCO, it is available in desktop client, System Setup > Migrate from StruxureWare Operation

The migration feature can/may be applied between two different setups/installations and executable only once! (eg. multiple migration is not allowed).

1- take a backup of the current setup (5 rooms)

2- restore the backup on a test server

3- on the test server, delete the unwanted rooms

4- now the test server should contain the wanted room. Take a backup.

5- backup from step 4 can now be migrated to the destination server.

Note: it is recommended to take a fresh backup (on the destination server) before starting the migration.

Kind regards

DCIM_Support · ‎2020-07-04

Its a nice solution but my issue is that the two servers are not connected... I want to export the data to a HD and transfer it that way to the other server.

Is this achievable?

DCIM_Support · ‎2020-07-04

Hi Gleb,

Servers do not need to be connected.

The backup file (ex. from step 4) can be transferred/copied to a usb drive/disk/etc and then brought to any location you wish.

Kind regards

DCIM_Support · ‎2020-07-04

Thank you very much!!
Helped me alot!

Cheers

DCIM_Support · ‎2020-07-04

Hi Gleb,

You are most welcome,

Kind regards

DCIM_Support · ‎2020-07-04

This question is closed for comments. You're welcome to start a new topic if you have further comments on this issue.