EcoStruxure IT forum
Schneider Electric support forum about installation and configuration for DCIM including EcoStruxure IT Expert, IT Advisor, Data Center Expert, and NetBotz
Link copied. Please paste this link to share this article on your social media post.
Posted: 2020-07-04 07:32 PM . Last Modified: 2024-04-04 11:11 PM
I need DDF file for parameter EasyLogic PM2100 - model METSEPM2130 , and ddf file for EGX 150 . please support me
(CID:132657523)
Link copied. Please paste this link to share this article on your social media post.
Link copied. Please paste this link to share this article on your social media post.
Posted: 2020-07-04 07:32 PM . Last Modified: 2024-04-04 11:11 PM
Dear nguyen van chung,
On a special resource Device Support you can find DDF-support already for a similar device from the PM2200 series:
You may to click on the button I WANT IT TOO and within a couple of business days you will be sent a web-link to download the DDF-file with the instruction.
If the above DDF-file does not work for you, then on the same resource you can make a new DDF-support request. How to do this is described in detail in topic and in video instructions.
You do not need to request a DDF-file for the TCP/IP Modbus gateway EGX150, as this does not make sense: you only need a DDF-file for your EasyLogic PM2100 devices.
With respect.
(CID:132657553)
Link copied. Please paste this link to share this article on your social media post.
Link copied. Please paste this link to share this article on your social media post.
Posted: 2020-07-04 07:32 PM . Last Modified: 2024-04-04 11:11 PM
Dear nguyen van chung,
On a special resource Device Support you can find DDF-support already for a similar device from the PM2200 series:
You may to click on the button I WANT IT TOO and within a couple of business days you will be sent a web-link to download the DDF-file with the instruction.
If the above DDF-file does not work for you, then on the same resource you can make a new DDF-support request. How to do this is described in detail in topic and in video instructions.
You do not need to request a DDF-file for the TCP/IP Modbus gateway EGX150, as this does not make sense: you only need a DDF-file for your EasyLogic PM2100 devices.
With respect.
(CID:132657553)
Link copied. Please paste this link to share this article on your social media post.
Link copied. Please paste this link to share this article on your social media post.
Posted: 2020-07-04 07:32 PM . Last Modified: 2024-04-04 11:11 PM
Thanks for your answer , I had DDF of PM2200 but when I added device all parameter on DCE difference on PM2100
(CID:132657702)
Link copied. Please paste this link to share this article on your social media post.
Link copied. Please paste this link to share this article on your social media post.
Posted: 2020-07-04 07:32 PM . Last Modified: 2024-04-04 11:11 PM
Dear nguyen van chung,
In this case, you really need to make a new DDF-support request for your PM2100 device. Since, unfortunately, I also did not find ready DDF-support for your PM2100 device ☹️.
With respect.
(CID:132657704)
Link copied. Please paste this link to share this article on your social media post.
Link copied. Please paste this link to share this article on your social media post.
Posted: 2020-07-04 07:32 PM . Last Modified: 2024-04-04 11:11 PM
thanks Sir
(CID:132658691)
Link copied. Please paste this link to share this article on your social media post.
Link copied. Please paste this link to share this article on your social media post.
Posted: 2020-07-04 07:32 PM . Last Modified: 2023-10-22 01:47 AM
This question is closed for comments. You're welcome to start a new topic if you have further comments on this issue.
Link copied. Please paste this link to share this article on your social media post.
Create your free account or log in to subscribe to the board - and gain access to more than 10,000+ support articles along with insights from experts and peers.