Subscribing is a smart move!
You can subscribe to this board after you log in or create your free account.
Invite a Co-worker
Send a co-worker an invite to the portal.Just enter their email address and we'll connect them to register. After joining, they will belong to the same company.
Send Invite Cancel
Solved
Go to Solution
Accepted Solutions
Link copied. Please paste this link to share this article on your social media post.
Hi Andrew,
Yes, currently in 8.1 it is possible to model power path without UPS. For capacity calculations, make sure that the PDU has "Input breaker" configured, example:
Kind regards
Link copied. Please paste this link to share this article on your social media post.
Hi Andrew,
Yes, currently in 8.1 it is possible to model power path without UPS. For capacity calculations, make sure that the PDU has "Input breaker" configured, example:
Kind regards
Link copied. Please paste this link to share this article on your social media post.
This question is closed for comments. You're welcome to start a new topic if you have further comments on this issue.
Create your free account or log in to subscribe to the board - and gain access to more than 10,000+ support articles along with insights from experts and peers.