DCO 8.0 a question about external system.

[DCIM_Support]

Hi support:

   I'm a newbie and learning how to use DCO, I have a question about external system, actually I haven't figured out what is that. For an example(see the pic) , what is the relationship between the servers in the red box?  the information says server 141 & poweredge 7250 are the external system of server 87, and they are ITO server.

(CID:110016085)

[DCIM_Support · Accepted solution]

Hi Ren,

In System Setup > External Systems Configuration, you can set up integration with an external system (such as DCE, ITO, etc.). For details/description please see the following page:  Configuring external system integration

Concerning your screen capture:

"Server 87" is the device name in your DCO model (located in Rack 5), seems to be associated with "PowerEdage 7250" and "Server 141" (these are the real servers discovered by your ITO server).

Following page contains details about ITO: StruxureWare Data Center Operation: IT Optimize

PS: It is recommended to upgrade the product to the latest version (currently DCO 8.0.3).

Kind regards

(CID:110016261)

[DCIM_Support]

This question is closed for comments. You're welcome to start a new topic if you have further comments on this issue.