DCE Upgrade failure

[DCIM_Support]

Hi,

I am upgrading DCE to 7.4.3 prior to 7.5 the file uploads ok, and when I get halfway through step 1 the DCE fails to respond and throws up this screen 

Once I restart the VM it runs ok but will not complete the upgrade. Has anyone else come up against this issue??

TIA

Mike

(CID:130681344)

[DCIM_Support · Accepted solution]

Dear Mike,

Please take a look at the below K-base document which has got a fix for your issue.

https://www.schneider-electric.co.in/en/faqs/FA290375/

First, you need to verify if you have enough storage on your DCE under Administration Settings-Storage. If it is only 4GB, then you need to consider increasing it before attempting to upgrade. 

I have posted a tip on how to increase the storage of DCE. Please refer the same. 

Procedure to increase storage for the DCE virtual appliance on VMware

I hope this helps. 

Regards,

Bala

(CID:130681355)

[DCIM_Support]

If what Bala mentioned does not help, please consider this FAQ as well: http://www.apc.com/us/en/faqs/FA333354 - StruxureWare DCE “Unable to retrieve data from server. Attempting to connect…” message received

(CID:130681395)

[DCIM_Support]

This question is closed for comments. You're welcome to start a new topic if you have further comments on this issue.