DCE-7.8.0: Unknown device alarms group for many devices?

[DCIM_Support]

This question was originally posted on DCIM Support by spezialist on 2019-12-12

---

Dear support,

Continuing the already closed topic : unfortunately in the new version of DCE-7.8.0 this bug has not been fixed ☹️.

Very thanks for the support.

(CID:152569614)

[DCIM_Support]

This comment was originally posted on DCIM Support by spezialist on 2019-12-12

---

Support case number: 65939453 .

(CID:152569620)

[DCIM_Support]

This answer was originally posted on DCIM Support by Steven Marchetti on 2019-12-12

---

Hi Spezialist, 

I've made a note in the bug report with both this post and case number that you've again contacted us on this issue but with the new version. I see the issue as well and the report in the system is indeed still open so whatever work may have been done towards resolution is not done yet (as you can clearly see). Again, all I can do is make note of it.

(CID:152569635)

[DCIM_Support]

This comment was originally posted on DCIM Support by spezialist on 2019-12-12

---

Ok, very thanks for the support.

(CID:152569642)

[DCIM_Support]

This question is closed for comments. You're welcome to start a new topic if you have further comments on this issue.