Cyberpower PR750 / PR1500 / PR3000

[CraigE]

Can Schneider Electric  ExoStruxure monitor the above Cyberpower UPS devices

[Cory_McDonald]

Hello @CraigE,

The below assumes that the devices are network capable and able to be monitored via SNMP or ModbusTCP.

For EcoStruxure IT Expert, a list of third party supported devices can be found in our help center: https://community.se.com/t5/Gateway-FAQ/How-can-I-see-if-my-device-is-currently-supported/ta-p/44706...

I am not currently seeing that any CyberPower devices are within that supported devices list.  I would still recommend trying to run a device discovery to ensure that support isn't there for it.

The easiest way to see if your device is supported or not is to have the gateway installed and attempt a device discovery.  If it shows up in the unsupported devices section, then it would not currently be supported.  You can submit a request for a Asset Definition from the help center using the link above.

Kind Regards,

Cory

[gdavid16]

they also have a sku you can buy to expedite the addition of certain objects (i dont have the part number, bought it 2+ years ago), but if you can wait it used to be free.

i had a different cyberark pdu added to the list.