Creation dco virtual machine within vmware - vShere client

[DCIM_Support]

Hello

We are implementing dco version 8.2.2 virtual machines within Vmware ESXi 6.0 on an HP server, it is possible to install iso -dco, but when you enter the application from the IP to download it, you do not access the page, attached screen

what is missing to enable the download of the application.

Pls if you can support or any solution you have got ?

regards

(CID:131966865)

[DCIM_Support]

Wait some time, and i ope go fine

(CID:131966871)

[DCIM_Support]

Per Miguel's comments, the DCO server may take 5 to 10 minutes to start the first time. Are you able to browse to the webmin page at https://:10000/, logon and see the server status?

(CID:131966934)

[DCIM_Support]

Hello Miguel / Greg

It took me longer than expected, I thought I was not entering

 everything went well, thank you very much.

(CID:132646519)

[DCIM_Support]

Hello

We are going to migrate to virtual machines and in the DCO test My client has an observation, we are having difficulties to enter the DCO from the web, we have a lot of time waiting, I have to restart the virtual server to reload.

I send a webmail screen, the third screen is when I restart and the space is released and finally the client DCO opens.

Any solution to this...

Thanks

(CID:132660401)

[DCIM_Support]

Did this problem resolve itself? The resources you allocated appear fine in the above screenshot. There are not many reasons DCO would not initially start if proper resources were initially allocated.

does the webmin status page show the database and application are running?

GregS

(CID:132662082)

[DCIM_Support]

This question is closed for comments. You're welcome to start a new topic if you have further comments on this issue.