Welcome to the new Schneider Electric Community

It's your place to connect with experts and peers, get continuous support, and share knowledge.

  • Explore the new navigation for even easier access to your community.
  • Bookmark and use our new, easy-to-remember address (community.se.com).
  • Get ready for more content and an improved experience.

Contact SchneiderCommunity.Support@se.com if you have any questions.

Close
Invite a Co-worker
Send a co-worker an invite to the Exchange portal.Just enter their email address and we’ll connect them to register. After joining, they will belong to the same company.
Send Invite Cancel
84315members
353475posts

After rebooting the server does not start Data Center Expert

EcoStruxure IT forum

A support forum for Data Center Operation, Data Center Expert, and EcoStruxure IT product users to share knowledge on installation, configuration, and general product use.

DCIM_Support
Picard
Picard
0 Likes
2
331

After rebooting the server does not start Data Center Expert

This question was originally posted on DCIM Support by rupodu on 2018-02-27


Hi all!

Two weeks ago  StruxureWare Data Center Expert 7.4.3 reported an error: Connection with rack-PDU is broken. After restart server, StruxureWare Data Center Expert does not work. Help, please, find the problem.

Very thanks for the support.

(CID:128761389)

2 Replies 2
DCIM_Support
Picard
Picard
0 Likes
0
331

Re: After rebooting the server does not start Data Center Expert

This answer was originally posted on DCIM Support by Steven Marchetti on 2018-02-27


Hi Yuri,

 

Check your resources. If you look at this k-base:

http://www.apc.com/us/en/faqs/index?page=content&id=FA303596

You'll see the error is usually due to a slow hard drive read/write speed basically. It could also be potentially due to a VM not having a secondary hard drive and someone attempting to increase the default drive.

 

Thanks,

Steve

 

(CID:128761418)

DCIM_Support
Picard
Picard
0 Likes
0
331

🔒 Closed

This question is closed for comments. You're welcome to start a new topic if you have further comments on this issue.