APC Netbotz 250 Smoke detector SNMP

[Darkmarauder]

I have recently purchased 2 APC Netbotz 250's.
I am in the process of adding it to our PRTG monitoring system and am having some problems.

So I have temp & humidity (same sensor) and fluid detection working.  However I am unable to find a reference to the OID needed in order to monitor the smoke detector.

Any assistance on this would be appreciated.

[APC_Steve]

Hi @Darkmarauder 

I just looked at the mib and it seems to be under state sensor:

.1.3.6.1.4.1.318.1.1.10.4.7

When I click on the "memSmokeSensorStatusTable",  the OID is

.1.3.6.1.4.1.318.1.1.10.4.7.2

Thanks,

Steve

[DewiP8]

Hi,

I am trying to onboard a APC Netbotz 250 into PRTG as well. Do you have any instructions for getting the sensors to show it PRTG? I have done a load of snmp walks but Im not sure what the OID's are for the Temp & Humidity Sensor or the Fluid Sensor. Any help would be massively appreciated.

Thanks

Dewi