EcoStruxure Geo SCADA Expert Forum
Schneider Electric support forum about installation, configuration, integration and troubleshooting of EcoStruxure Geo SCADA Expert (ClearSCADA, ViewX, WebX).
Link copied. Please paste this link to share this article on your social media post.
Posted: 2023-03-30 08:23 AM . Last Modified: 2023-05-02 11:45 PM
Is there a setting to Make Virtual ViewX read only or do we have to connect it to a DMZ performance server to accomplish read only from Virtual ViewX?
Link copied. Please paste this link to share this article on your social media post.
Link copied. Please paste this link to share this article on your social media post.
Posted: 2023-03-30 11:53 AM
Hi Geoff,
There's read-only and read-only! In 2022 the Virtual ViewX server has a new setting, or absence of setting, to give Virtual ViewX users 'full' access, but add the setting /limited to make it more like WebX, i.e. no configuration (2022 release).
Naturally the user's privilege controls what they can do, and it's always the lower of the privileges which a user gets.
And then last but not least there are the permission restrictions on the server, which you set for ViewX, WebX and the two Virtual ViewX modes I described above. You can have a Virtual ViewX server which is restricted but is connected to the Main/Standby servers (2022 release). Optionally these restrictions can be set on the Main server and pushed to the Standby server(s).
Link copied. Please paste this link to share this article on your social media post.
Link copied. Please paste this link to share this article on your social media post.
Posted: 2023-03-30 02:09 PM
Thanks Steve, I that will provide the security the customer is looking for, otherwise there is always the DMZ server route.
Link copied. Please paste this link to share this article on your social media post.
Create your free account or log in to subscribe to the board - and gain access to more than 10,000+ support articles along with insights from experts and peers.