Sampling period in EEH

[Thierry_Baudard]

Hello,

I'm currently starting an architecture Panel Srever +EEH in my lab.

The sampling period In Panel Server, is in Read Only mode because this value is defined at EEH level. (info available in Panel Server user guide)

... but I have some questions about sampling period values. In my installation, the value of the sampling period is automatically set to 1 minute (screenshot hereunder)

      - can it be another value ot will it be always 1 minute  ?

      - will it be the same value of period for all the measures/ all the downstream products in case of archi with several Panel Servers/site servers ?

      - definition of sampling period  is  fully automatic or System Integrator can influence/ define it ? 

Thanks for your help.

[EduardoFainblum]

@CarolinaCastane 

[CarolinaCastane · Accepted solution]

Hi Thierry.

Thanks for the call. I am adding the notes here for reference.

The sampling configuration (set of measurements and sampling period) is set automatically by the EEH. Data sampling settings are not editable with Panel Server webpages and EcoStruxure Power Commission software and today are not editable in EEH.

Recent changes at the EEH side define a typical sampling period of 15 min (Before 1 min)

Thanks

Carolina