Issue
Inovonics Wireless Interface problem
Product Line
Andover Continuum,TAC Vista
Environment
- Inovonics FA7403 receiver
- Inovonics EN4000 Universal Serial Receiver
Cause
Inovonics provides an interface to access wireless temperature sensors. The FA7403 receiver can be used to interface with Xenta equipment or Continuum equipment, however these interfaces use different protocols.
Resolution
The Xenta equipment requires a hexadecimal protocol which corresponds to the FA7403 receiver.
The Continuum equipment requires an ASCII protocol which corresponds to the FA7403-ASC receiver.
If you have the wrong receiver for the equipment you are trying to interface with then contact Product Support for steps to reconfigure this device.
Note: Inovonics EN4000 Universal Serial Receiver**, REPLACES FA7403
