APC UPS for Home and Office Forum
Support forum to share knowledge about installation and configuration of APC offers including Home Office UPS, Surge Protectors, UTS, software and services.
Posted: 2021-06-28 04:47 AM . Last Modified: 2024-03-27 01:30 AM
Link copied. Please paste this link to share this article on your social media post.
Posted: 2021-06-28 04:47 AM . Last Modified: 2024-03-27 01:30 AM
we have a group of computers all conected with APC 750va, with electric power network work normally, but when power plant work to begin to beep, the red light flash and makes a popping sound. ups all have the same symptom with the electric plant. help!!!
Link copied. Please paste this link to share this article on your social media post.
Link copied. Please paste this link to share this article on your social media post.
Posted: 2021-06-28 04:47 AM . Last Modified: 2024-03-27 01:30 AM
Hi Ivan,
For us to answer your query, it is best to provide us the exact UPS model of your APC750 UPS. At the back, there is a barcode sticker where the model and serial number is located. This is to help us identify what the flashing red light means.
Aside from this, I would also appreciate if you can provide the type of load that you are using with the APC750 UPS (including its power rating). One possibility of the red light being present is an overload alarm if the load attached on the UPS exceeds its rating.
I hope this helps. Please let me know if you need any clarification, by replying to this thread.
Link copied. Please paste this link to share this article on your social media post.
Link copied. Please paste this link to share this article on your social media post.
Posted: 2021-06-28 04:47 AM . Last Modified: 2024-03-27 01:30 AM
Hi Ivan,
For us to answer your query, it is best to provide us the exact UPS model of your APC750 UPS. At the back, there is a barcode sticker where the model and serial number is located. This is to help us identify what the flashing red light means.
Aside from this, I would also appreciate if you can provide the type of load that you are using with the APC750 UPS (including its power rating). One possibility of the red light being present is an overload alarm if the load attached on the UPS exceeds its rating.
I hope this helps. Please let me know if you need any clarification, by replying to this thread.
Link copied. Please paste this link to share this article on your social media post.
Create your free account or log in to subscribe to the board - and gain access to more than 10,000+ support articles along with insights from experts and peers.