Support forum to share knowledge about installation and configuration of APC offers including Home Office UPS, Surge Protectors, UTS, software and services.
Send a co-worker an invite to the portal.Just enter their email address and we'll connect them to register. After joining, they will belong to the same company.
You have entered an invalid email address. Please re-enter the email address.
This co-worker has already been invited to the Exchange portal. Please invite another co-worker.
Please enter email address
Send InviteCancel
Invitation Sent
Your invitation was sent.Thanks for sharing Exchange with your co-worker.
Link copied. Please paste this link to share this article on your social media post.
Posted: 2021-06-2907:21 AM. Last Modified: 2024-03-2104:59 AM
XPS 900 low batery charge
I currently have an xps 900 ups that doesn't not seem to have the correct amount of run time. I only have about 200 watts of use but only about 5 minutes of runtime according to powerchute, even with a 98% charge. This is not a battery problem as i have already switched the battery with another xps 900 unit that is reporting an accurate run time.
I am running windows 7 with all the the recommended patches and have updated power chute to the latest version.
Link copied. Please paste this link to share this article on your social media post.
Posted: 2021-06-2907:21 AM. Last Modified: 2024-03-2104:59 AM
it may be just confused..
put a none critical load on the unit.. Load it up to about 30%.. Pull the ac power plug and let the ups run till it shuts off due to the batteries being exhausted.
Link copied. Please paste this link to share this article on your social media post.
Posted: 2021-06-2907:21 AM. Last Modified: 2024-03-2104:59 AM
it may be just confused..
put a none critical load on the unit.. Load it up to about 30%.. Pull the ac power plug and let the ups run till it shuts off due to the batteries being exhausted.