UPS not serving purpose here.. please guide

[Anonymous user]

Hi, I am new to this Ups thing.
I bought one 650 VA, fixed my one System and one TV device. I was so happy that finally my ongoing work will not be lost. But since first day i have noticed that UPS is not serving me the purpose.
As the light sheds the ideal system should activate that system should not get a glance of this shed.
I am not getting this out of my machine. I noticed that as the light sheds"power went off" my pc gets to restart..... 😞
I cant go back to dealer now as it will be a headache to me since i work in office round clock and i only have a day off on sunday, and sundays are off here for service centers..
I do hope i am satisfied with lots of help here.


Is there a software that can liaison to avoid this restart ?
I am thinking i have lost my price over it...
Help me please!

Rgds...Nouman

---------------------------------------------------------------------------------------------------

Its weared, another observation,

I checked my ups performance by manually unpluging the power from the supply and there was no restarting.. I did this number of times.

Then i was contented with my UPS.
After 10 hours there was a routine power failure from City Divisional power supply. My pc got restarted... What is it now i cant get a clue.. UPS was fully charged for 10 Hours..
The same thing happed before as well as stated in my post.!!!!!

Message was edited by: smnouman

[Anonymous user]

I wanted to thank you for acknowledging , I have worked seriously and i solved the issue. I went to my dealer asked him to tell me the cause and he said just do a proper charging again. I did it and UPS is online for me.

I am closing my thread.

Best rgds.....Nouman

[Techie_apc]

I am glad that you solved the issue!

Have a nice day 🙂

[Anonymous user · Accepted solution]

Hi, I am new to this Ups thing.
I bought one 650 VA, fixed my one System and one TV device. I was so happy that finally my ongoing work will not be lost. But since first day i have noticed that UPS is not serving me the purpose.
As the light sheds the ideal system should activate that system should not get a glance of this shed.
I am not getting this out of my machine. I noticed that as the light sheds"power went off" my pc gets to restart..... 😞
I cant go back to dealer now as it will be a headache to me since i work in office round clock and i only have a day off on sunday, and sundays are off here for service centers..
I do hope i am satisfied with lots of help here.


Is there a software that can liaison to avoid this restart ?
I am thinking i have lost my price over it...
Help me please!

Rgds...Nouman

---------------------------------------------------------------------------------------------------

Its weared, another observation,

I checked my ups performance by manually unpluging the power from the supply and there was no restarting.. I did this number of times.

Then i was contented with my UPS.
After 10 hours there was a routine power failure from City Divisional power supply. My pc got restarted... What is it now i cant get a clue.. UPS was fully charged for 10 Hours..
The same thing happed before as well as stated in my post.!!!!!

Message was edited by: smnouman