SMT1000I: Cannot turn off the LCD display

Anonymous user · ‎2021-06-29

Hi,

I am trying to select the "Power Saving" Display Mode as described in the PDF manual on page 7 but there is no such option. I tried both the standard and advanced menus and also the start-up wizard with no luck. Does anyone know if there is a way to show this menu item or maybe another way to turn off the LCD display?

Thank you,
Andrew

BillP · ‎2021-06-29

hi andrew,

unfortunately, for an unreason known to me, this option was removed from the UPS firmware prior to the release of the UPS, even though you see it in the manual. it was supposed to be an option but then like i said they removed it. it is on the list for enhancements/requests for a future version of the UPS firmware, which I just dont know why they didnt keep it as an option.

thus, you will not be able to turn the UPS LCD off 😞

See Answer In Context

BillP · ‎2021-06-29

hi andrew,

unfortunately, for an unreason known to me, this option was removed from the UPS firmware prior to the release of the UPS, even though you see it in the manual. it was supposed to be an option but then like i said they removed it. it is on the list for enhancements/requests for a future version of the UPS firmware, which I just dont know why they didnt keep it as an option.

thus, you will not be able to turn the UPS LCD off 😞