Protecting TWO phone lines simultaneously

[Anonymous user]

Having just lost all my phone and networking equipment on two networks following a lightning strike and power surge down the phone lines I'd like to protect 2 adjacent, but separate phone lines (VDSL/50Mbit) from power spikes simultaneously. Can I use (for example) a single APC Performance SurgeArrest (model PF8VNT3-GR) which has phone AND network inlets and outlets and route one phone through the phone protection and the second phone through the network protection, or do I need to buy two surge protectors?
Alternatively is there an APC device that will protect 2 phone lines?

Thanks for any advice...

[BillP]

Hi,

I suggest looking at the PTEL2 on APC.com or if that does not meet your needs you should call local sales support. There contact information will be found at this link. http://www.apc.com/de/de/support/contact-us/index.jsp

[Anonymous user · Accepted solution]

Thank you for this - I'd not seen that device. APC support suggested it too. I'll look at it more closely!