Not all the power connectors I have will fit on this unit

[BillP]

Hi,

Note I don't really know anything about power supplies 🙂

I have Back-UPS ES 650. I need to connect 4 devices on the battery backup side but 1 connector won't fit.

Outlet #1 and #2 (shown below) would use the large connectors for the modem and router
Outlet #2 won't fit because of #1

What I have:
- router: MU30-P120250-A1 - looks something like this: https://www.amazon.com/Linksys-Router-Power-Adapter-RHQ-120100-1/dp/B005HBLTLG
- modem: M12-Y120100-A1 - https://www.google.ca/search?q=M12-Y120100-A1&biw=1280&bih=645&source=lnms&tbm=isch&sa=X&ved=0ahUKEw...

Am I stuck getting a new UPS? or is there a way around it? 🙂

Just hope I don't run into the same probem with a different one...

[Anonymous user · Accepted solution]

There is a way around it. This is a very common problem with basically every outlet strip and UPS ever made.

Special purpose short extension cords (click this for an example) are made to solve exactly this problem.

(If my response has answered your question, please feel free to mark it with a "like" and as the answer to your question.)