Ask our Experts
Didn't find what you are looking for? Ask our experts!
Launch of Consumer/Home Owner registration process! We are pleased to announce the commencement of the Consumer/Home Owner Registration Process on Community. Consumers/Home Owners may now proceed to register by clicking on Login/Register. The process is straightforward and designed to be completed in just a few steps.
Support forum to share knowledge about installation and configuration of APC offers including Home Office UPS, Surge Protectors, UTS, software and services.
Search in
Posted: 2021-06-28 05:24 AM . Last Modified: 2024-03-27 01:01 AM
Link copied. Please paste this link to share this article on your social media post.
Posted: 2021-06-28 05:24 AM . Last Modified: 2024-03-27 01:01 AM
Hi,
I want to know whether the power consumption that is been displayed in the Back UPS Pro LCD panel is showing the power consumed by the connected devices or is it showing the total AC Power draw of everything connected to the UPS. I am pretty confused because I had the understanding that a PC SMPS which is say 70% efficient might be consuming 450W but the power draw from the wall socket may be around 600W, so I want to know whether the LCD Panel is showing the total AC Power draw from the wall socket or is it showing the active power draw from the connected systems only.
Link copied. Please paste this link to share this article on your social media post.
Link copied. Please paste this link to share this article on your social media post.
Posted: 2021-06-28 05:24 AM . Last Modified: 2024-03-27 01:01 AM
The UPS always shows the load power only.
If its any help, I upgraded the PSU in a machine here recently from a 10 year old unit to the latest garb, and efficiency went from about 82% to about 92%. A measurable drop in watts at the wall, so they're all far better than 70% and some are up in the 90's now.
Link copied. Please paste this link to share this article on your social media post.
Link copied. Please paste this link to share this article on your social media post.
Posted: 2021-06-28 05:24 AM . Last Modified: 2024-03-27 01:01 AM
The UPS always shows the load power only.
If its any help, I upgraded the PSU in a machine here recently from a 10 year old unit to the latest garb, and efficiency went from about 82% to about 92%. A measurable drop in watts at the wall, so they're all far better than 70% and some are up in the 90's now.
Link copied. Please paste this link to share this article on your social media post.
You’ve reached the end of your document
Create your free account or log in to subscribe to the board - and gain access to more than 10,000+ support articles along with insights from experts and peers.