Welcome to the new Schneider Electric Community

It's your place to connect with experts and peers, get continuous support, and share knowledge.

  • Explore the new navigation for even easier access to your community.
  • Bookmark and use our new, easy-to-remember address (community.se.com).
  • Get ready for more content and an improved experience.

Contact SchneiderCommunity.Support@se.com if you have any questions.

Close
Invite a Co-worker
Send a co-worker an invite to the Exchange portal.Just enter their email address and we’ll connect them to register. After joining, they will belong to the same company.
Send Invite Cancel
84865members
354358posts

Multi Smart Ups on a single battery system?

APC UPS for Home and Office Forum

Schneider Electric support forum for our APC offers including Home Office UPS, Surge Protectors, UTS, software and services and associated products designed to share knowledge, installation, and configuration.

Solved
hamitduk_apc
Ensign
Ensign
0 Likes
2
107

Multi Smart Ups on a single battery system?

This was originally posted on APC forums on 7/25/2010


OK, can I run multiple Smart Ups 1400 on a single 24VDC batt bank. We have a large 24VDC storage system for our solar and wind Genny's. running it up to 120VAC, then back to 24VDC add so much loss!

Hami


Accepted Solutions
hamitduk_apc
Ensign
Ensign
0 Likes
0
109

Multi Smart Ups on a single battery system?

This was originally posted on APC forums on 7/26/2010


OK, can I run multiple Smart Ups 1400 on a single 24VDC batt bank. We have a large 24VDC storage system for our solar and wind Genny's. running it up to 120VAC, then back to 24VDC add so much loss!

Hami

See Answer In Context

2 Replies 2
hamitduk_apc
Ensign
Ensign
0 Likes
0
109

Re: Multi Smart Ups on a single battery system?

This was originally posted on APC forums on 8/14/2010


I have no problem hooking up multi storage cell to a UPS, the issue is multi UPS to one storage bank. Is there a way of disabling the chargers. That is more my concern.

hamitduk_apc
Ensign
Ensign
0 Likes
0
110

Multi Smart Ups on a single battery system?

This was originally posted on APC forums on 7/26/2010


OK, can I run multiple Smart Ups 1400 on a single 24VDC batt bank. We have a large 24VDC storage system for our solar and wind Genny's. running it up to 120VAC, then back to 24VDC add so much loss!

Hami