Welcome to the new Schneider Electric Community

It's your place to connect with experts and peers, get continuous support, and share knowledge.

  • Explore the new navigation for even easier access to your community.
  • Bookmark and use our new, easy-to-remember address (community.se.com).
  • Get ready for more content and an improved experience.

Contact SchneiderCommunity.Support@se.com if you have any questions.

Close
Invite a Co-worker
Send a co-worker an invite to the Exchange portal.Just enter their email address and we’ll connect them to register. After joining, they will belong to the same company.
Send Invite Cancel
84257members
353358posts

MGE Pulsar Extreme 1000c shut down

APC UPS for Home and Office Forum

Schneider Electric support forum for our APC offers including Home Office UPS, Surge Protectors, UTS, software and services and associated products designed to share knowledge, installation, and configuration.

Solved
qqqqqq666_apc
Cadet
0 Likes
2
156

MGE Pulsar Extreme 1000c shut down

This was originally posted on APC forums on 10/5/2012


Hi all!

I have been given the aforementioned ups and connected it to my pc. Its been recoginzed by the usb connection and i can see some details of it. My problem is that when i shut my pc down i want the ups to stop working too. Unfortunately it doesnt; and even when i push the IO button to turn it off, its fan still works and makes a disturbing noise.

Do i miss something regarding the ups' operation?

Thanks in advance 🙂


Accepted Solutions
BillP
Administrator Administrator
Administrator
0 Likes
0
156

Re: MGE Pulsar Extreme 1000c shut down

This reply was originally posted by Angela on APC forums on 10/5/2012


i do not know anything about MGE pulsar units myself unfortunately and i believe that product line is now owned and supported by Eaton..i might suggest running it by their support..

See Answer In Context

2 Replies 2
voidstar_apc
Janeway
Janeway
0 Likes
0
156

Re: MGE Pulsar Extreme 1000c shut down

This was originally posted on APC forums on 10/8/2012


>
My problem is that when i shut my pc down i want the ups to stop working too. Unfortunately it doesnt; and even when i push the IO button to turn it off, its fan still works and makes a disturbing noise.
>

I don't know much about Eaton's UPSes such as the one you have, but that may be normal operation. The power button on APC UPSes only turns the output on and off. The battery charger needs to remain running to prolong the battery life.

BillP
Administrator Administrator
Administrator
0 Likes
0
157

Re: MGE Pulsar Extreme 1000c shut down

This reply was originally posted by Angela on APC forums on 10/5/2012


i do not know anything about MGE pulsar units myself unfortunately and i believe that product line is now owned and supported by Eaton..i might suggest running it by their support..