Welcome to the new Schneider Electric Community

It's your place to connect with experts and peers, get continuous support, and share knowledge.

  • Explore the new navigation for even easier access to your community.
  • Bookmark and use our new, easy-to-remember address (community.se.com).
  • Get ready for more content and an improved experience.

Contact SchneiderCommunity.Support@se.com if you have any questions.

Close
Invite a Co-worker
Send a co-worker an invite to the Exchange portal.Just enter their email address and we’ll connect them to register. After joining, they will belong to the same company.
Send Invite Cancel
84590members
353857posts

I replaced the batteries on my J10

APC UPS for Home and Office Forum

Schneider Electric support forum for our APC offers including Home Office UPS, Surge Protectors, UTS, software and services and associated products designed to share knowledge, installation, and configuration.

Solved
Motorcity1_apc
Cadet
0 Likes
1
140

I replaced the batteries on my J10

This was originally posted on APC forums on 7/12/2015


I took it to battery plus and they said the part that u plug back into the unit is dead. HOw do get a replacement  plug or do i have to get a new J10 battery pack ?

Tags (1)

Accepted Solutions
BillP
Administrator Administrator
Administrator
0 Likes
0
140

Re: I replaced the batteries on my J10

This reply was originally posted by Angela on APC forums on 7/13/2015


We don't offer this separately so yes, you'd have to buy a new battery pack/module which is what we intend the user to do (versus replacing individual battery modules inside). According to the product page (which the current version is the black model here ->http://www.apc.com/products/resource/include/techspec_index.cfm?base_sku=J10BLK  ) APCRBC108 is used.

See Answer In Context

1 Reply 1
BillP
Administrator Administrator
Administrator
0 Likes
0
141

Re: I replaced the batteries on my J10

This reply was originally posted by Angela on APC forums on 7/13/2015


We don't offer this separately so yes, you'd have to buy a new battery pack/module which is what we intend the user to do (versus replacing individual battery modules inside). According to the product page (which the current version is the black model here ->http://www.apc.com/products/resource/include/techspec_index.cfm?base_sku=J10BLK  ) APCRBC108 is used.