APC UPS for Home and Office Forum
Support forum to share knowledge about installation and configuration of APC offers including Home Office UPS, Surge Protectors, UTS, software and services.
Link copied. Please paste this link to share this article on your social media post.
Posted: 3 weeks ago
I've just got a BE650G2-UK and I'd like to set up email notifications for when it starts running on batteries. This is due to (thankfully rare) but intermittent issues with power tripping, so would be good to get notification should it occur and we're out.
Would I be thinking that the only way to do that with this particular UPS is with a powered up, connected PC running Powerchute Serial Shutdown?
I've spent many hours re-reading the manual, Googling, all to no avail, so hopefully someone can help.
Link copied. Please paste this link to share this article on your social media post.
Link copied. Please paste this link to share this article on your social media post.
Posted: 3 weeks ago . Last Modified: 3 weeks ago
Please review this APC FAQ:
https://www.apc.com/us/en/faqs/FAQ000260209/
If the information provided was on point and provided the solution.
Please mark it as such so the information can assist the next person asking the same. 👍
Link copied. Please paste this link to share this article on your social media post.
Link copied. Please paste this link to share this article on your social media post.
Posted: 3 weeks ago . Last Modified: 3 weeks ago
Please review this APC FAQ:
https://www.apc.com/us/en/faqs/FAQ000260209/
If the information provided was on point and provided the solution.
Please mark it as such so the information can assist the next person asking the same. 👍
Link copied. Please paste this link to share this article on your social media post.
Link copied. Please paste this link to share this article on your social media post.
Posted: 2 weeks ago
Thanks Teken. Reading between the lines and thinking about it, the only way you can have notifications is with a plugged in and powered on PC. Otherwise I'd need a Smart UPS so I don't have to have it powered on all the time.
Instructions are very good and definitely helped setting up.
Link copied. Please paste this link to share this article on your social media post.
Create your free account or log in to subscribe to the board - and gain access to more than 10,000+ support articles along with insights from experts and peers.