Ask Me About Webinar: Data Center Assets - Modeling, Cooling, and CFD Simulation Join our 30-minute expert session on July 10, 2025 (9:00 AM & 5:00 PM CET), to explore Digital Twins, cooling simulations, and IT infrastructure modeling. Learn how to boost resiliency and plan power capacity effectively.Register now to secure your spot!
manage UPS and Servers
APC UPS Data Center & Enterprise Solutions Forum
Schneider, APC support forum to share knowledge about installation and configuration for Data Center and Business Power UPSs, Accessories, Software, Services.
Send a co-worker an invite to the portal.Just enter their email address and we'll connect them to register. After joining, they will belong to the same company.
You have entered an invalid email address. Please re-enter the email address.
This co-worker has already been invited to the Exchange portal. Please invite another co-worker.
Please enter email address
Send InviteCancel
Invitation Sent
Your invitation was sent.Thanks for sharing Exchange with your co-worker.
Link copied. Please paste this link to share this article on your social media post.
Posted: 2021-06-2905:08 AM. Last Modified: 2024-03-1301:04 AM
manage UPS and Servers
i have 20 servers in a rack and i have 5 smartups-3000 devices with ap9631 nics in them. I want to manage all 5 UPS and then when if necessary tell those 5 servers to shut off if the battery is getting low in the case of a power outage. I have the 20 servers connected to 5 Dell basic PDU units. And each of those PDU units connects to its own UPS. What software will handle this? Or do i need to add a different piece of hardware. Thanks.
Link copied. Please paste this link to share this article on your social media post.
Posted: 2021-06-2905:08 AM. Last Modified: 2024-03-1301:04 AM
You can use [PowerChute Network Shutdown|http://www.apc.com/products/family/index.cfm?id=127&ISOCountryCode=US] to handle graceful shutdowns on your servers in the event of a power outage. You would install the software on each server and configure the settings to ensure everything has enough time to shutdown (dependent on the runtime available and the time it takes your servers to shutdown properly). After the shutdown sequence, the UPS will go to sleep and turn back on once power is restored.
Link copied. Please paste this link to share this article on your social media post.
Posted: 2021-06-2905:08 AM. Last Modified: 2024-03-1301:04 AM
You can use [PowerChute Network Shutdown|http://www.apc.com/products/family/index.cfm?id=127&ISOCountryCode=US] to handle graceful shutdowns on your servers in the event of a power outage. You would install the software on each server and configure the settings to ensure everything has enough time to shutdown (dependent on the runtime available and the time it takes your servers to shutdown properly). After the shutdown sequence, the UPS will go to sleep and turn back on once power is restored.
This is a heading
With achievable small steps, users progress and continually feel satisfaction in task accomplishment.
Usetiful Onboarding Checklist remembers the progress of every user, allowing them to take bite-sized journeys and continue where they left.